What power of light to hire

what power of light to hire at home

When are we going to see what power of light to hire, it is necessary to know all the operation on it so as not to spend us and have an unnecessary expense or fall short and that the leads frequently jump. Knowing what power of light to hire is essential to spend just at our level of light and waste less electricity.

Therefore, in this article we are going to tell you everything you need to know to learn what power of light to hire.

What is electrical power

icp

To learn what power of light to hire, we must first know what this concept means. The power is the amount of energy that is produced or consumed for each unit of time. This time can be measured in seconds, minutes, hours, days ... and the power is measured in joules or watts.

The energy that is generated through electrical mechanisms measures the ability to generate work, that is, any type of “effort”. To understand it better, let's put simple examples of work: heating water, moving the blades of a fan, producing air, moving, etc. All this requires work that manages to overcome the opposing forces, forces such as gravity, the force of friction with the ground or air, the temperatures already present in the environment ... and that work is in the form of energy (energy electrical, thermal, mechanical ...).

The relationship established between energy and power is the rate at which energy is consumed. That is, how energy is measured in the joules consumed per unit of time. Each joule consumed per second is one watt (watt), so this is the unit of measurement for power. Since a watt is a very small unit, kilowatts (kW) are typically used. When you see the bill for electricity, appliances and so on, they will come in kW.

Frequently asked questions about what power of light to hire

what power of light to hire

Some of the most frequent questions that are asked when you need to know what power of light to hire are related to the frequency with which the leads jump when there is a different consumption than usual or because there is no light if we connect several electrical appliances at the same time.

And it is that to answer all these questions it is necessary to refer to the number of electrical appliances that are in our home. It must be taken into account that the electrical power depends on many factors. Having a bigger or smaller house is not important, since it is possible to live in a fairly large house with few appliances. The opposite can also happen. A house may have enough electrical appliances and a small surface area and need to have more power contracted.

To know what power of light to hire you need to know the number of appliances you have in your home and if you are going to use it or not at the same time.

Rules to learn what power of light to hire

appliances at the same time

We are going to see what are the first and main rules that must be taken into account to know what power of light to hire.

Rule 1

The higher the contracted electrical power, the higher the fixed amount that must be paid. This is an important factor to take into account since we cannot go beyond the contracted electricity since we will pay more. The idea is to learn more or less the expense that you are going to have and hire what is necessary to satisfy said electricity demand.

Rule 2

Having less power contracted does not mean that we will have greater savings. It is clear that for every kW you go down in subcontracting you will save 50 euros a year. However, all or savings disappear if you fall short of using several appliances at the same time. Nobody wants to spend all the time going to the entrance box since the ICP continuously jumps. You run out of light from turning on the oven at the same time you put a washing machine on and this can be too comfortable if it happens frequently.

If this happens, you have to increase the contracted power, even if it costs me a little more money. Saving the contracted power reduction can be more expensive if you do not analyze them correctly.

Rule 3

Information is power and although you can decide what to hire, it is important to be well informed. There is a limit marked for safety reasons when increasing the power. Namely, not all electrical installations in all buildings places support high powers. If you need more than the limit allowed, you will have to completely renew the installation. Otherwise, unwanted accidents can happen.

When it comes to reducing power, you also have the last word. However, it should be noted that if you fell short of power you will be the one who suffers all the discomfort about it. You can lower or raise the power as you prefer, as long as multiples of 0.1 kW are found. If in the end you spend lowering the contracted power, the cost of raising it again will mean that all the savings have been used for nothing.

Who and how the power is chosen

Consumers are in charge of agreeing with the company on the power to be hired. The most normal thing is that the company itself makes a recommendation based on its installation and number of appliances. In the end, you are the one who has the last word and you can hire the amount you want. The distributor is only obliged to accept one change in electrical power per year, although it can be modified according to your needs. It is obvious that you cannot be modifying its contracted power every month.

To find out if you have been hiring, there is a trick that never fails. Turn on all the electrical appliances in your house at the same time. If among these appliances you find the oven, air conditioning and vacuum cleaner, and even so the ICP does not jump, it is probably that you have too much contracted power. The occasions in which you must connect most or all electrical appliances at the same time in your house are very few or null. You don't need to be prepared for it. You are paying for something that you never or hardly ever use. All this will be reflected in the electricity bill.

I hope that with this information you can learn more about what power of light to hire for a house.


Be the first to comment

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: Miguel Ángel Gatón
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.