Since winter is already here there are different keys to save on the electricity bill this winter. It is clear that the price of light has increased a lot in a short time. Therefore, it is key to try to find those tips and tricks to reduce energy consumption in our home. In addition, we will not only be reducing the electricity bill, but we will also be contributing to the reduction of the environmental impact that causes climate change.
In this article we are going to tell you what are the different keys to save on the electricity bill this winter and some tricks for it.
Keys to save on the electricity bill this winter
Heating
Our first advice, and one of the most important, is to check our heating system, since it can cost between 40% and 60% of our electricity bill. We usually notice this increase during the coldest winters, although it can also occur during the hottest summers. Checking the good condition of our equipment or updating it to adapt it to our needs is the key to considerably reducing our expenses.
If we are looking for personal heating to install in a room, heat accumulators or heat emitters are two quick installation options that they do not require any extra work and require little maintenance. At this point, many consumers are wondering which of these two options they should choose, which is better for them, and which will save more on their bill.
The key to answering these questions is to ask ourselves how many hours we spend in our homes, that is, how many hours do we want to heat our home or maintain a comfortable temperature. If we need to heat for a few hours, the emitters are a good option, but if we need to maintain the temperature for longer, accumulators are ideal because they are designed to use the cheapest energy available. Time discrimination.
Check the price of contract light
This leads us to our next recommendation, which is to review electricity rates, because in many cases we find that customers are not contracting the most appropriate rate, they pay more for the kilowatts consumed, or they contract more electricity than necessary. Hourly rates are better for saving electricity if you can also adjust your usage based on the time of day. Programming is control, and control can help you save
In addition, most of these heating devices are managed via WIFI to be able to access your heating from anywhere to control the temperature of each connected device.
Recommended room temperature
When you turn on your heating or air conditioning, always try to maintain the recommended temperature. Please note that raising the set temperature one or two degrees more may result in a significant increase in your electricity bill. The temperature in winter is more reasonable around 20-21°C.
Airing the house for 10 minutes in the morning is enough. If we open the windows and leave them open for a long time, we lose all the heat inside.
Isolation
Pay attention to insulation, it is also a fundamental part to avoid heat loss. You must check the windows and doors, otherwise the heat or cold will escape and the equipment will consume too much. Sometimes major fixes aren't necessary to improve insulation, and you can use small fixes that go a long way, like installing weather stripping on windows and doors or insulating the drums of your blinds. The better your home is insulated, the easier it will be to maintain the inside temperature without causing a lot of heat loss.
Sanitary hot water
Domestic hot water is another important part of your electricity bill, so as we suggested above, keep a reasonable indoor temperature, try to use it wisely. If you have a thermos, You can install a thermostatic valve and you will increase the performance of your water heater by 25-30%. If you have a differentiated hourly rate, you can use a timer at the exit so that it only heats the water outside peak hours.
Another option that you could take into account if your thermos is not very old is to activate the Eco Smart function so that it "learns" your usual consumption and heats the water when you use it normally.
Choose a location to install the thermos. It is important to never install your thermos in an outdoor area such as a patio or deck. No matter how much internal insulation you have, you will always have more heat loss and have to use more electricity to keep your water at the desired temperature.
Lighting and appliances with good energy classification
To improve the consumption of the lighting part, You can replace ordinary light bulbs (incandescent lamps) with LED lighting, your savings on the electricity bill will be substantial. Despite the higher initial cost, LED lighting offers many advantages, such as light production, safety and energy savings, as well as having a lower environmental impact throughout its life cycle.
Although this may seem like an obvious or impossible task in some homes, try not to leave lights on in rooms where you are not present. Still, if there is a room or bathroom in your home that resists you, you might consider using a presence detector or a timer.
Change appliances
Replacing major equipment with more efficient ones can also save money on your bill, especially for equipment that has been in use for years and has reached the end of its useful life. The most important of these is the refrigerator, since It is an appliance that works 24 hours a day and must also maintain a constant temperature inside.
Lastly, avoid standby mode. While we've always thought so, it's hard to get into the habit of completely turning off certain appliances, and according to OCU, appliances consume about 11 percent of power consumption while in standby mode. Power strips with a switch have become the most comfortable and fastest solution to turn off several devices at the same time.
I hope that with this information you can learn more about the keys to save on your electricity bill this winter.